Mon Panier
| Désignation | Référence | Qté |
|---|
| Désignation | Référence | Qté |
|---|
13. FUEL INJECTION SYSTEM MXU500i
Blinks Failure Fault description Priority Fault management
Codes
Ignition coil or electric 1. Check if the connector of ignition coil is loosen.
2. Check if the ECU send signal to Ignition coil.
circuit malfunction 3. Check if the power source and resistance is
11 P0350 malfunction
2
Fuel pump relay or 1. Check if the connector of relay is loosen.
12 P0230 2 2. Check if the ECU send signal to relay.
electric circuit 3. Check the fuel pump relay resistance
malfunction
Check if the belt of CVT is broken.
13 P0219 Engine speed is over 2
than top speed
.Check if ECU output DC5V to sensor.
2. Check if the power source of all sensor is DC5V.
3. Replace a new ECU if the CELP still blinks even the
14 P1560 Sensor don't receive 2 output power source of ECU is normal.
power source from ECU
Don't use it at present.
15 P0700 Engine starting speed 2
exceed CVT speed
limited
Engine temperature 1. Check if the connector of sensor is loosen.
2. Check if ECU pin is broken.
sensor or electric circuit 3.Check if the resistance of sensor is malfunction.
16 P0115 2
malfunction
Don't use it at present.
17 P1561 Temperature gauge 2
electric circuit
malfunction
22-13
bonne réactivité. Les pièces sont arrivées comme prévu et bien emballées.
Pas de problèmes de conformité.
Bon vendeur, j'y retournerai.
Produit super mais panne incompréensible !
Ras 
4.7 / 5