16. BRAKE SYSTEM MXU 500IRS
Rear Brake Master Cylinder
Push the hole under the front brake master
cylinder and then remove the brake light
switch.
Remove the screw and then remove the
brake light switch from the rear brake
master cylinder.
Front Brake Master Cylinder
Brake pedal master cylinder
Remove the brake reservoir cap and drain
the brake fluid from the hydraulic brake
system (refer to the "REAR BRAKE
FLUID CHANGE/AIR BLEED" section
or "COMBINATION BRAKE FLUID
CHANGE/AIR BLEED (ON ROAD)" Fluid Hose Brake Arm
section in this chapter).
Do not splash brake fluid onto any
rubber, plastic and coated parts. When
working with brake fluid, use shop
towels to cover these parts.
Remove the joint then disconnect the fluid
hose from the master cylinder.
Remove the bolt/nut then remove the brake
arm from the master cylinder.
16-24
4.7 / 5