13. BRAKE SYSTEM ATV 300/250 FRONT BRAKE CALIPER REMOVAL Remove the front wheel. (page 14-3) First drain the brake fluid from the hydraulic brake system. (page 13-4) Remove the brake pad pins. Remove the brake fluid tube bolt. Remove the two bolts attaching the brake caliper. Remove the brake caliper. Brake Pad Pins Bolts Fluid Tube Bolt DISASSEMBLY Remove the brake pads. (page 13-3) Remove the brake pad spring plate. Spring Plate Remove the piston from the brake caliper. If necessary, use compressed air to squeeze out the piston through the brake fluid inlet opening and place a shop towel under the caliper to avoid contamination caused by the removed piston. Check the piston cylinder for scratches or wear and replace if necessary. Push the piston dust seal outward to remove Dust Seal 13-8