3. INSPECTION/ADJUSTMENT ATV 300/250 Drive Belt DRIVE BELT Remove the left crankcase cover. Inspect the drive belt for cracks, scaling, chipping or excessive wear. Measure the V-belt width Service limit: 22 mm (0.88 in) BRAKE PADS INSPECTION A wear indicator is provided on each brake. The indicators allows checking of brake pads wear. Check the position of the indicator. If the indicator reaches the wear limit line, to replace the pads. Front Caliper Rear Caliper Inspection Window (R/L Brake Lever) BRAKE FLUID INSPECTION Check if the fluid level is below the lower level mark through the inspection window. 3-11