12. FRONT WHEEL/FRONT BRAKE/FRONT
SUSPENSION/STEERING SYSTEM Mongoose/KXR 90/50
STEERING SYSTEM
HANDLEBAR REMOVAL
Remove the following parts:
Handlebar and Front fender.
Refer to the "FRAME COVER" section in
the CHAPTER 2
INSPECTION
Inspect the handlebar.
Replace if cracks, bends or damage.
INSTALLATION
Install handlebar and handlebar holder, then
tighten the four bolts.
Torque: 1.82.5kgf-m
· Align the mark on the handlebar with
the lower handlebar holder surface.
· Be sure the upper handlebar holder
mark face to front.
· Fist tighten the bolts on the front side
of the handlebar holder, and then Mark
tighten the bolts on the rear side.
Refer to the "BRAKE FREE PLAY"
section in the CHAPTER 3 to adjust front
brake.
Brake cable free play: 1020mm
12-13
4.7 / 5