16. STARTING SYSTEM Mongoose/KXR 90/50 INSPECTION Inspect the starter one-way clutch drive gear teeth for burrs/chips/roughness/wear. Inspect the starter one-way clutch drive gear contacting surfaces for pitting/wear/damage. Teeth Contacting Surfaces Push the weight roller to arrow direction for unsmooth operation. Replace starter clutch assembly. ASSEMBLY Starter Oneway Clutch 32mm Lock Nut Install the starter one-way clutch driver gear in the reverse order of removal. Do not reuse the starter clutch bolts that have been removed. Torque: 5.06.0kgf-m Starter Clutch Bolts Starter Oneway Clutch Drive Gear Check starter clutch operation. Clutch operation checking steps: Install the starter wheel gear to the starter clutch, and hold the starter clutch. When turning the wheel gear clockwise (1) the starter clutch and the wheel gear should be engaged. If not, the starter clutch is faulty. Replace it. When turning the wheel gear counterclockwise (2), the wheel gear should turn freely. If not, the starter clutch is faulty. Replace it. 16-8