16. STARTING SYSTEM Mongoose/KXR 90/50 Starter Relay STARTER RELAY INSPECTION Remove the seat. (Refer to the chapter 2) Turn the ignition switch ON and the starter relay is normal if you hear a click when the starter button is depressed. If there is no click sound: · Inspect the starter relay voltage · Inspect the starter relay ground circuit · Check for continuity between the starter relay yellow/red and green/red wire terminals STARTER RELAY VOLTAGE Starter Relay (Mongoose/KXR 90) INSPECTION Connect a 12V battery across the starter relay yellow/red and green/red wire terminals. Connect an electric tester between the starter relay large terminals and check for continuity between the two terminals. The relay is normal if there is continuity. Replace the starter relay with a new one if there is no continuity. Starter Relay (Mongoose/KXR 50) 16-6