12. FRONT WHEEL/FRONT BRAKE/FRONT SUSPENSION/STEERING SYSTEM Mongoose/KXR 90/50 Dust Seals Remove the dust seal of each frame side. Remove the snap ring. Snap Ring Remove the bearing. INSTALLATION Apply grease to a new dust seal lip and install the dust seal (under frame). Pack bearing cavities with grease. Drive in the bearing and install snap ring. Apply grease to a new dust seal lip and install the dust seal. · Do not allow the bearings to tilt while driving them in. · Drive in the bearing squarely with the sealed end facing out. Special Oil seal and bearing install E014 Apply the grease onto the bearings and oil Collar seal lips of the frame. Install steering column and collar, then tighten the nut. Torque: 6.08.0kgf-m Install cotter pins and band ends of cotter pin. Always use a new cotter pin. 12-15