Mon Panier
| Désignation | Référence | Qté |
|---|
| Désignation | Référence | Qté |
|---|
1. GENERAL INFORMATION K-XCT 125i
SERVICE PRECAUTIONS Apply or add designated greases and
lubricants to the specified lubrication
Make sure to install new gaskets, O-rings, points.
circlips, cotter pins, etc. when
reassembling.
When tightening bolts or nuts, begin with
larger-diameter to smaller ones at several When two persons work together, pay
times, and tighten to the specified torque attention to the mutual working safety.
diagonally.
Disconnect the battery negative (-) terminal
before operation.
Use genuine parts and lubricants. When using a spanner or other tools,
make sure not to damage the motorcycle
surface.
When servicing the motorcycle, be sure to
use special tools for removal and After operation, check all connecting points,
installation. fasteners, and lines for proper connection
and installation.
When connecting the battery, the positive
(+) terminal must be connected first.
After connection, apply grease to the
battery terminals.
Terminal caps shall be installed securely.
After disassembly, clean removed parts.
Lubricate sliding surfaces with engine oil
before reassembly.
If the fuse is burned out, find the cause
and repair it. Replace it with a new one
according to the specified capacity.
1-3
bonne réactivité. Les pièces sont arrivées comme prévu et bien emballées.
Pas de problèmes de conformité.
Bon vendeur, j'y retournerai.
Produit super mais panne incompréensible !
Ras 
4.7 / 5