4. LUBRICATION SYSTEM                                                                           K-XCT 125i



 DISASSEMBLY


 Remove the screw and disassemble the oil
 pump as shown.


                                Pump Cover
                                                                 Outer Rotor

                                              Inner Rotor
                                                                               Pump Body
   Screw




                    Dowel Pin




                                                  Pump Shaft




 ASSEMBLY
                                                               Dowel Pin              Pump Body
 Install the outer rotor, inner rotor and pump
 shaft into the pump body.

 Insert the pump shaft by aligning the flat
    on the shaft with the flat in the inner
    rotor. Install the dowel pin.

 There is one punch mark on the surface of the
 inner rotor and outer rotor.
 The mark is upside.
                                                            Outer Rotor Inner Rotor        Pump Shaft




4-5