dinkstreet 300 i abs Manuel atelier : Page 139

          13. FUEL INJECTION SYSTEM                                                Downtown 300i ABS




 SPECIFICATIONS

                      ITEM                                   SPECIFICATIONS
 Throttle body identification number            LEA7
 Idle speed                                     1600100 rpm
 Throttle grip free play                        26 mm (1/161/4 in)
 Fuel injector resistance (at 20°C/68°F)        11.70.6
 Fuel pump resistance Float at full position    110033 
 (at 20°C/68°F)         Float at empty position 1003 
 Fuel pump standard pressure (at 40 L/Hr)       2946 kPa (3 Bar)
                        At -20°C/-4°F           18.8 K
 Water temperature
                        At 40°C/104°F           1.136 K
 sensor resistance
                        At 100°C/212°F          0.1553 K
 Intake pressure sensor (MAP) pressure (at 1 13.332 kPa (0.13332 kgf/ cm2, 1.89 psi)
 4.2 V)                                         119.99 kPa (1.1999 kgf/ cm2, 17.04 psi)
                                                Primary: 3.57~4.83
 Inductive ignition coil
                                                Secondary: 10.42~14.49K
 Throttle position sensor (TPS) resistance (at 3500~6500
 20°C/68°F)
 Crank position sensor voltage (at 200 rpm)     100~130
 O2 heater sensor resistance (at 20°C/68°F)     6.79.5  (engine warming condition)
 Tilt switch voltage Standard                   0.41.4 V
                        Over 65° (fall down)    3.74.4 V




                                                                                          13-2