4. LUBRICATION SYSTEM SUPER 9 50 Control Cable Oil Pump OIL PUMP REMOVAL Do not allow foreign matters to enter the crankcase. Before removing the oil pump, clean the oil pump and crankcase surfaces. Remove the met-in box. ( 2-2) Oil Inlet Line Oil Outlet Line Disconnect the oil pump control cable from Bolt the pump body. Disconnect the oil inlet line from the oil pump. Then, disconnect the oil outlet line. Before disconnecting the oil line, clip the oil line to avoid oil flowing out and then plug the oil line after it is disconnected. Remove the oil pump control cable plate bolt and copper washer. Remove the oil pump from the crankcase. Control Cable Plate O-ring OIL PUMP INSPECTION Remove the oil pump and inspect the following items: · Weakened O-ring · Damage to crankcase mating surface · Damage to pump body · Control lever operation · Oil leaks through oil seals · Worn or damaged pump pinion Do not disassemble the oil pump which cannot be used after disassembly. Control Lever Pinion 4-2