12. CARBURETOR SUPER 9 50 REED VALVE Bolts REMOVAL Remove the rear carrier. Remove the frame body cover. Remove the four intake manifold bolts and gasket. Remove the reed valve and gasket. Intake Manifold INSPECTION Reeds Reed Stopper Check the reed valve for damaged or weak reeds. Check the reed valve seat for cracks, damage or clearance between the seat and reed. Replace the valve if necessary. Do not disassemble or bend the reed stopper. To do so can cause loss of engine power and engine damage. If any of the stopper, reed or valve seat is faulty, replace them as a unit. Reed Valve Seat INSTALLATION Install the reed valve in the reverse order of removal. · Install a new gasket with the gasket indentation aligned with the reed valve. · After installation, check for intake air leaks. 12-11