3. INSPECTION/ADJUSTMENT SUPER 9 50 FINAL REDUCTION GEAR OIL Oil Check Bolt Hole/Oil Filler · Place the motorcycle on its main stand on level ground. Stop the engine and remove the oil check bolt. The oil level shall be at the oil check bolt hole. If the oil level is low, add the recommended oil SAE90# to the proper level. Install the oil check bolt. · Make sure that the sealing washer is in good condition. OIL CHANGE Remove the oil check bolt. Remove the oil drain bolt and drain the oil thoroughly. Install the oil drain bolt. Torque: 9.8N-m · Make sure that the sealing washer is in good condition. Fill the final reduction with the recommended oil SAE90#. Gear Oil Capacity: At disassembly : 120cc At change : 100cc Oil Drain Bolt/Sealing Washer Reinstall the oil check bolt and check for oil leaks. DRIVE BELT Remove the left crankcase cover. Inspect the drive belt for cracks or excessive wear. Replace the drive belt with a new one if necessary and in accordance with the Maintenance Schedule. Drive Belt 3-9