1. GENERAL INFORMATION Downtown 300i ABS SERVICE PRECAUTIONS Apply or add designated greases and lubricants to the specified lubrication Make sure to install new gaskets, O-rings, points. circlips, cotter pins, etc. when reassembling. Confirm Capacity When tightening bolts or nuts, begin with larger-diameter to smaller ones at several When two persons work together, pay times, and tighten to the specified torque attention to the mutual working safety. diagonally. Disconnect the battery negative (-) terminal before operation. Use genuine parts and lubricants. When using a spanner or other tools, make sure not to damage the motorcycle surface. When servicing the motorcycle, be sure to After operation, check all connecting points, use special tools for removal and fasteners, and lines for proper connection installation. and installation. When connecting the battery, the positive (+) terminal must be connected first. After connection, apply grease to the battery terminals. Terminal caps shall be installed securely. After disassembly, clean removed parts. Lubricate sliding surfaces with engine oil before reassembly. If the fuse is burned out, find the cause and repair it. Replace it with a new one according to the specified capacity. 1-3