10. A.C. GENERATOR/STARTER CLUTCH Downtown 300i ABS SERVICE INFORMATION GENERAL INSTRUCTIONS · All operations and inspections in this section can be made with the engine installed. · Should drain the coolant before removing the right crankcase cover. · Be careful not to drain the coolant when the engine temperature is high. (Perform this operation when the engine is cold.) · Drain the coolant into a clean container. · Drain the engine oil into a clean container before removing the right crankcase cover. · When the right crankcase cover is installed, fill with the recommended engine oil and coolant. Remember to bleed air from the water hose. SPECIFICATIONS Engine oil: SAE 5W/50# API-SJ above Engine quality: Synthetic Oil capacity at change: 1.5 Liter Coolant capacity: Radiator capacity: 0.766 liter Hose with cool coolant: 0.169 liter Hose with hot coolant: 0.194 liter Upper limit for reserve tank capacity: 0.590 liter Lower limit for reserve tank capacity: 0.370 liter SPECIAL TOOLS Flywheel puller E003 Flywheel holder E021 SPECIFICATIONS Item Standard (mm) Service Limit (mm) Starter driven gear I.D. 22.02622.045 22.15mm Starter driven gear O.D. 42.19542.208 41.5mm TORQUE VALUES Flywheel nut : 5.5~6.5 kgf-m (58.8 N-m) TROUBLESHOOTING Refer to chapter 1 for A.C. generator troubleshooting. Starter motor rotates but engine does not start · Faulty starter clutch · Starter motor rotates reversely · Weak battery 10-2