13. STEERINGHANDLEBAR/FRONTWHEEL/FRONT
BRAKE/FRONTSHOCKABSORBER/FRONTFORK ZX / SCOUT 50
Punch Mark
Place the brake master cylinder on the
handlebar and install the holder with "up"
mark facing up. Be sure to align the
punch mark with the holder joint.
First tighten the upper bolt and then tighten
the lower bolt.
Torque: 1.01.4kg-m
Bolts "Up" Mark
Install the brake fluid pipe with the
attaching bolt and two sealing washers.
Install the handlebar covers. ( 12-3)
Fill the brake reservoir with recommended
brake fluid to the upper limit and bleed air
according to the method stated in 13-9.
BRAKE CALIPER (FRONT)
Removal
Remove the brake caliper. ( 13-10)
Place a clean container under the brake
caliper and disconnect the brake fluid pipe
from the caliper.
Do not spill brake fluid on any coated
surfaces.
Bolt
13-13