1. GENERAL INFORMATION People GT 300i
SPECIFICATIONS
Name People GT 300i Oil filter type Full-flow filtration
Model No. BF60AA Oil capacity 1.5 liter
Overall length 2130 mm Exchanging capacity 1.3 liter
Overall width 750 mm Fi injection system
Overall height 1280 mm Air cleaner type & No Paper element, wet
Fuel capacity 9 liters
Wheel base 1450 mm
Engine type 4 stroke O.H.C. Brand Keihin
Throttle Body Butterfly type
Displacement 298.9 cc
Fuel Used 92# nonleaded Venturi diameter (mm) 34
gasoline Fuel pump pressure 3.0 bar
Curb weight Front wheel 66 Electrical system
(kg) Rear wheel 100 Ignition type ECU
Total 166 Ignition timing ECU control
Front wheel 97
Max. weight Spark plug CR7E (NGK)
Rear wheel 149 Spark plug gap 0.60.7mm
(kg)
Total 246 Battery Capacity 12V12AH
Ground clearance (mm) Transmission system
150 Clutch type Dry multi-disc
Braking distance (m) 7.9m / 40 km/hr Transmission type
CVT
Min. turning radius (mm) R/L 2250/2170 Operation type Auto centrifugal
Engine part Reduction gear type Two-stage reduction
Starting system Starting motor Reduction ratio Primary 2.24~0.72
Type Final 7.222
Gasoline 4-cycle
Moving device
Cylinder arrangement Single cylinder
Tire type Tubeless
Combustion chamber type Semi-sphere
Front wheel 110/70-16
Valve arrangement O.H.C.-4V Tire spec.
Bore x stroke (mm) 72.7 * 72 Rear wheel 140/70-16
Compression ratio 10.8:1 Front wheel 1.75
Compression pressure Tire pressure Rear wheel 2.25 (with
(kg/cm-rpm) 16-570 rpm (kg/cm) passenger)
Max. output (ps/rpm) 28 / 7750 Wheel material Aluminium
Max. torque (kg-m/rpm) 2.7 / 6500 Left 45°5
Open -9.5° BTDC Turning angle
Intake Timing Right 45°5
Close 37.5° BTDC
Front Disk brake
Exhaust Open 40° BTDC Brake type
Timing Close 10° BTDC Rear Disk brake
Valve Intake 0.10 Damping Device
clearance Exhaust 0.10 Suspension Front Telescope
Idle speed (rpm) 1600100 rpm type Rear Swing arm
Cooling Type Liquid cooling Shock absorber Front 110 mm
Lubrication type Forced pressure &
wet sump stroke Rear 100 mm
Oil pump type Inner/outer rotor
1-2