13. REAR WHEEL/SWING ARM/
HYDRAULIC BRAKE Mongoose/KXR 90/50
REAR WHEEL
REAR WHEEL REMOVAL
Place the machine on a level place.
Remove four nuts attaching the wheel.
Elevate the rear wheels by placing a
suitable stand under the rear of frame.
Support the machine securely so there is
no danger of it falling over.
Remove wheel. Nuts
INSPECTION
Measure the wheel runout.
Service Limit:
Vertical: 2.0 mm
Lateral: 2.0mm
Replace wheel if out of specification.
INSTALLATION
Install the rear wheel and tighten the nuts
(wheel).
Torque: 4.05.0kgf-m
13-4