13. FUEL SYSTEM/CARBURETOR/ FUEL PUMP/ FUEL TANK PEOPLE/PEOPLE S 250 SERVICE INFORMATION GENERAL INSTRUCTIONS · When working with gasoline, keep away from sparks and flames. · Note the locations of O-rings when disassembling and replace them with new ones during assembly. · Before float chamber disassembly, drain the residual gasoline from the float chamber. · Do not try to disassemble the auto bystarter. · When assembling the vacuum chamber and air cut-off valve, be careful not to damage the diaphragms. · All cables, fuel lines and wires must be routed and secured at correct locations. · When removing the fuel tank, keep sparks and flames away from the working area. · When removing the fuel tank, the remaining fuel in the tank must be lower than of the fuel tank capacity to avoid gasoline overflowing. · Fuel tank capacity: 8.0 liters SPECIFICATIONS PEOPLE 250 PEOPLE S 250 Type CVK CVK Size of bore (mm) 30 30 Main jet NO 108# 104# Pilot screw opening 2 1 Piston diameter (mm) 28.8 26 Idle speed 1700 1600 Throttle type Butterfly type Butterfly type Fuel pump output 33cc/1800rpm/10 Seconds 33cc/1800rpm/10 Seconds SPECIAL TOOLS Float level gauge Fuel unit remover 13-5