agility 50 rs Manuel atelier : Page 146

          13. REAR WHEEL/REAR BRAKE/
    REAR SUSPENSION                                               AGILITY 50

 REAR WHEEL
 REMOVAL
 Remove the exhaust muffler. ( 2-5)
 Remove the rear axle nut.
 Remove the rear wheel.
 .




                                                  Rear Axle Nut

 INSPECTION
 Measure the rear wheel rim runout.
 Service Limits:
    Radial: 2.0mm replace if over
    Axial: 2.0mm replace if over




 Inspect the rear brake drum.
 Measure the rear brake drum I.D.
 Service Limits: 130mm replace if over




                                                   Lock Bolts              Joint Lock Nuts
 INSTALLATION
 Install the rear wheel in the reverse order of
 removal.
 Tighten the rear axle nut.
 Torque: 11.0-13.0kg-m
 Install the exhaust muffler.
 Torque:
 Exhaust muffler joint lock nut: 1.0~1.4kgf-m
 Exhaust muffler lock bolt: 3.0~3.6kgf-m
 First install and tighten the exhaust
    muffler joint lock nuts and then the
    exhaust muffler lock bolts.

                                                                               13-2