9. DRIVE AND DRIVEN PULLEYS/ KICK STARTER AGILITY 50 Movable Driven Face Oil Seal Pull out the guide roller pins and guide rollers. Remove the movable driven face from the driven face. Remove the O-rings and oil seal from the movable driven face. O-rings Guide Roller Pin INSPECTION Inspect the clutch outer for wear or damage. Measure the clutch outer I.D. Service Limit: 107.5mm replace if over Check the clutch shoes for wear or damage. Measure the clutch lining thickness. Service Limit: 2.0mm replace if below Measure the driven face spring free length. Service Limit: 92.8mm replace if below 9-10