zx scout 50 Manuel atelier : Page 7

          2. GENERAL INFORMATION                                                  ZX / SCOUT 50

  If the fuse is burned out, find the cause and   The connector shall be inserted
  repair it. Replace it with a new one            completely.
  according to the specified capacity.            If the double connector has a lock, lock
                                                  it at the correct position.
                                                  Check if there is any loose wire.
                   Easy confirm




                                                  Before connecting a terminal, check for
                                                  damaged terminal cover or loose
  After operation, terminal caps shall be         negative terminal.
  installed securely.




                                                  Check the double connector cover for
                                                  proper coverage and installation.

  When taking out the connector, the lock on
  the connector shall be released before
  operation.


                                                  Insert the terminal completely.
                                                  Check the terminal cover for proper
                                                  coverage.
                                                  Do not make the terminal cover opening
  Hold the connector body when connecting         face up.
  or disconnecting it.
  Do not pull the connector wire.




                                                  Secure wire harnesses to the frame with
                                                  their respective wire bands at the
  Check if any connector terminal is bending,     designated locations.
  protruding or loose.                            Tighten the bands so that only the insulated
                                                  surfaces contact the wire harnesses.




2-3