16. ELECTRICAL EQUIPMENT VITALITY 50 Bolts STARTER MOTOR REMOVAL Disconnect the starter motor cable. Remove the two bolts attaching the starter motor and remove the starter motor. The installation sequence is the reverse of removal. Connect the starter motor cable connector Check the O-ring for wear or damage and replace it if necessary. Apply grease to the O-ring and install the starter motor. Tighten the two mounting bolts. Starter Motor Torque: 0.81.2kgf-m The starter motor cable connector must be installed properly. STARTER MOTOR INSPECTION Starter Motor Battery (+) Terminal Connect a battery across the starter motor and check for its operation. Battery 16-19