16. BRAKE SYSTEM MXU 550EXi/MXU 500i Refer to the "REAR PARKING SYSTEM" section in this chapter to install the left master cylinder holder. Install the brake fluid hose with the attaching bolt and two new sealing washers, then tighten the bolt to the specified torque. Torque: 3.5 kgf-m (35 Nm, 25 lbf-ft) Apply lightweight lithium-soap base grease to the dust boot in the master cylinder, then install the brake lever. Apply lightweight lithium-soap base grease to the bolt, then install and tighten the bolt and nut securely. Fill the brake reservoir with the specified brake fluid and bleed air from the brake system (refer to the "FRONT BRAKE FLUID CHANGE/AIR BLEED" section or "REAR BRAKE FLUID CHANGE/AIR BLEED" section or "COMBINATION BRAKE FLUID CHANGE/AIR BLEED " section in this chapter). Apply grease to the dust boot Install the brake reservoir cap. 16-26