16. BRAKE SYSTEM MXU 550EXi/MXU 500i 10. Connect a transparent hose to the right caliper bleed valve and then loosen the bleed valve nuts. Use the syringe to draw brake fluid into it until there is no air bubbles in the transparent hose. Then, tighten the bleed valve nut. Torque: 0.6 kgf-m (6 Nm, 4.32 lbf-ft) Connect a transparent hose to the left caliper bleed valve and then loosen the Bleed Valve Nut bleed valve nuts. Use the syringe to draw brake fluid into it until there is no air bubbles in the transparent hose. Then, tighten the bleed valve nut. Torque: 0.6 kgf-m (6 Nm, 4.32 lbf-ft) · When drawing brake fluid with the syringe, the brake fluid level should be kept over 1/2 of the brake reservoir height (brake pedal). · Use only the recommended brake fluid. Recommended Brake Fluid: DOT-4 11. Loosen the rear caliper (combined) bleed valve nut. Connect the transparent hose to the bleed valve. Bleed Valve Nut Use the syringe to draw brake fluid into it until there is no air bubbles in the transparent hose. Then, tighten the bleed valve nut. Torque: 0.6 kgf-m (6 Nm, 4.32 lbf-ft) · When drawing brake fluid with the syringe, the brake fluid level should be kept over 1/2 of the brake reservoir height (brake pedal). · Use only the recommended brake fluid. Recommended Brake Fluid: DOT-4 16-20