13. REAR WHEEL/SWING ARM/ HYDRAULIC BRAKE ATV 150/125 SWING ARM Place the machine on a level place. Elevate the rear wheels by placing a suitable stand under the rear of frame. Support the machine securely so there is no danger of it falling over. Remove the rear wheels, rear hub with rear axle. Refer to the "REAR WHEEL Cotter Pin REMOVAL" section MXU 150: Remove the lower mounting bolt. MX'er 150/125: Remove the cotter pin, washer and shaft. When removing the lower shaft, hold the swing arm so that it does not drop Shaft downwards when the shaft is removed. Absorber Bolt Remove the upper mounting bolt, then remove the shock absorber. Check the tightening torque of the pivot shaft (swingarm) securing nut. Torque: 7 kgf-m (70 N-m, 50 lbf-ft) Securing Nut 13-14