13-2 CARBURETOR
GRAND DINK125/150DINK125B&W125
Measure the resistance between the
auto choke wire terminals.
Resistance:
10 below (10 minutes minimum
after stopping the engine)
If the reading is not within the limit,
replace the auto bystarter with a new
one.
Connect a hose to the fuel enriching
circuit of the carburetor. Connect the
auto choke yellow wire to the positive
(+) terminal of a battery and
green/black wire to the negative (-)
terminal. Wait 5 minutes and blow the
hose with mouth. If the passage is
blocked, the auto bystarter is normal.
Disconnect the auto bystarter from the
battery. Wait 30 minutes and blow the
hose with mouth. If air can be blown
into the hose, the auto bystarter is
normal.
NSTALLATION
Install the auto bystarter and set plate.
Install and tighten the two screws.
Auto bystarter/Set Plate
13-2-16