18. STARTING SYSTEM STRYKER 125/150 Wire Terminal STARTER MOTOR HOUSING CONTINUITY CHECK Check to confirm that there is no continuity between the starter motor wire terminal and the motor housing. Also check for the continuity between the wire terminal and each brush. There should be continuity. Replace if necessary. Measure the length of the brushes. Service Limit: 8.5mm replace if below Brushes Check for continuity between the brushes. Replace if there is continuity. Front Cover Check if the bearing in the front cover turns freely and has no excessive play. Check the oil seal for wear or damage. Replace if necessary. Oil Seal 18-4