8 STARTER MOTOR/ GENERATOR/LEFT . CRANK CASE COVER/STARTER CLUTCH Air Tube Band /CAMSHAFT STRYKER 125/150 STARTER MOTOR REMOVAL Remove the two starter motor mounting bolts and the motor. Inspect the starter motor O-ring for damage or deterioration. Inspect the starter motor pinion for wear or damage. Mounting Bolts Bolts Cover O-ring Reduction Gear Remove the three bolts attaching the starter motor reduction gear cover. Remove the reduction gear cover. Remove the reduction gear, shaft and washers. Inspect the reduction gear for wear or damage. Inspect the reduction gear cover O-ring for damage or deterioration. Washers Shaft Reduction Pinion LEFT CRANKCASE COVER/ GENERATOR REMOVAL Disconnect the neutral light switch wire. Remove the eight left crankcase cover bolts. Remove the left crankcase cover and two dowel pins. Clean off all gasket material from the left crankcase cover. Remove the reduction pinion. Neutral Light Wire Washers Flywheel Lock Bolt Flywheel Holder Flywheel Hold the flywheel with a flywheel holder. Remove the flywheel lock bolt. Remove the flywheel using a flywheel puller. Flywheel Holder Flywheel Puller 8-3