people 250 Manuel atelier : Page 65

          5. ENGINE REMOVAL/INSTALLATION                                            PEOPLE 250


 ENGINE REMOVAL
 Drain the coolant. ( 3-9)
 Remove the met-in box, carrier. ( 2-6)
 Remove the frame body cover, center cover
 and rear fender A together. ( 2-6)
 Remove the exhaust muffler. ( 2-10)
 Disconnect all of the A.C. generator.


                                                             A.C. Generator Wire Connectors
                                                         Nut                Starter Motor Wire


 Remove the nut to disconnect the starter
 motor wire that goes to the starter relay.




                                                  Starter Relay
                                                  Secondary Air                Air Inlet Hose
                                                  Vacuum Tube     Inlet Pipe   (V-belt Chamber)



 Disconnect the secondary air vacuum tube
 and fuel pump vacuum tube from inlet pipe.
 Disconnect the air inlet hose (v-belt chamber)
 from frame.




                                                                          Fuel Pump Vacuum Tube
                                                  Intake Manifold                 Radiator Air
                                                  Band            Thermostat      Ventilated Tube
 Loosen the intake manifold band (air cleaner
 tube and inlet pipe).
 Disconnect the radiator air ventilated tube
 and thermosensor wire coupler from
 thermostat.




                                                  Thermosensor Wire Coupler


                                                                                            5-2