people 250 Manuel atelier : Page 52

          3. INSPECTION/ADJUSTMENT                                                    PEOPLE 250

                                                  Oil Check Bolt Hole/Oil Filler
 FINAL REDUCTION GEAR OIL
 · Place the scooter on its main stand on
     level ground.
 Stop the engine and remove the oil checks
 bolt.
 The oil level shall be at the oil check
 blowhole.
 If the oil level is low, add the recommended
 oil SAE90# to the proper level.

 Install the oil check bolt.                         Oil Drain Bolt/Sealing Washer
 · Make sure that the sealing washer is in
     good condition.



 GEAR OIL CHANGE
 Remove the oil check bolt.
 Removes the oil drains bolt and drain the oil
 thoroughly.
 Install the oil drain bolt.
 Torque: 9.8N-m
 · Make sure that the sealing washer is in
     good condition.

 Fill the final reduction with the recommended
 oil SAE90#.
 Gear Oil Capacity:
    At disassembly : 230cc
    At change        : 180cc
 Reinstall the oil check bolt and check for oil
 leaks.

 DRIVE BELT
 Remove the left crankcase cover.
 Inspect the drive belt for cracks or excessive
 wear.
 Replace the drive belt with a new one if
 necessary and in accordance with the
 Maintenance Schedule.




                                                  Drive Belt



                                                                                     3-8