3. INSPECTION/ADJUSTMENT MXU 550EXi/MXU500i
STEERING SYSTEM
INSPECTION
Place the machine on a level place.
Check the steering column bushings and
bearings:
Move the handlebar up and down, and/or
back and forth.
Replace the steering column bushings and
or bearings if excessive play.
Check the tie-rod ends
Turn the handlebar to the left and/or right
until it stops completely, then slightly
moving the handlebar from left to right.
Replace the tie-rod ends if tie-rod end has
any vertical play.
Tie-rod Ends
Raise the front end of the machine so that
there is no weight on the front wheels.
Check ball joints and/or wheel bearings.
Move the wheels lately back and froth.
Replace the front arms and/or wheel
bearings if excessive free play.
3-22
4.7 / 5