3. INSPECTION/ADJUSTMENT MXU 500 IRS
7. Turn the rod clockwise or
counterclockwise to align the joint ball in
the rod with the hole on the shift arm,
then install and tighten the bolt and nut.
When align the joint ball in the rod with
the hole on the shift arm. Always keep
the joint ball original position, do not
turn the joint ball.
8. Tighten the lock nuts of the rod.
CABLE INSPECTION AND
LUBRICATION
Damaged cable sheath may cause
corrosion and interfere with the cable
movement. An unsafe condition may
result so replace such cable as soon as
possible.
Inspect the cable sheath.
Replace if damage.
Check the cable operation.
Lubricate or replace if unsmooth operation.
Hold cable end high and apply several
drops of lubricant to cable.
LEVER LUBRICATION
Lock Nut
Lubricate the pivoting parts of each lever.
ADJUSTING THE REAR BRAKE
LIIGHT SWITCH (BRAKE
PEDAL)
1. Loosen the lock nut.
2. Turn the adjusting nut clockwise or
counterclockwise until the rear brake
light comes on at the proper time.
3. Tighten the lock nut securely.
Adjuster
3-29
4.7 / 5