9. KICK STARTER/DRIVE PULLEY/ CLUTCH/DRIVEN PULLEY ATV 50 Set the driven pulley, driven face spring and clutch assembly onto the clutch spring compressor. Compress the tool and install the 39 mm (1.56 in) drive plate nut. Tighten the 39 mm (1.56 in) nut to the specified torque. Torque: 5.5 kgf-m (55 N-m, 39.6 lbf-ft) Special tool: Clutch spring compressor A120E00034 Clutch Spring Compressor Clutch/Driven Pulley CLUTCH/DRIVEN PULLEY INSTALLATION Install the drive belt on the clutch/driven pulley and then install the clutch/driven pulley onto the drive shaft. Clutch Outer Install the clutch outer. Hold the clutch outer with the universal holder. Install and tighten the clutch outer nut. Torque: 3.8 kg-m (38 N-m, 27.4 lbf-ft) Special tool: Universal holder A120E00017 Install the left crankcase cover. ( 9-6) Universal Holder 9-17