Mon Panier
| Désignation | Référence | Qté |
|---|
| Désignation | Référence | Qté |
|---|
5. FUEL SYSTEM Mongoose/KXR 90/50
Screws Control Shaft Washer
DISASSEMBLY
Remove the two screws on the retaining ring
and then remove retaining ring.
Remove the washer and control shaft.
Retaining Ring
Rubber Gasket Fuel Valve Body
Remove the rubber gasket from the fuel
valve body.
INSPECTION
Inspect the fuel valve body for dirt and clog.
Clean if necessary.
Replace the rubber gasket with new ones if
they are damaged or deteriorated.
Replace the O-rings with new ones if they Control Shaft O-ring
are damaged or deteriorated.
Tab Tab
ASSEMBLY
Reverse the "DISASSEMBLY" procedures.
Install rubber gasket, control shaft, washer
and retaining ring.
· Aligning the tab on the control shaft
with the outlet duct in the fuel valve
body.
· Aligning the tab on the retaining ring
with the outlet duct in the fuel valve
body.
Outlet Duct Outlet Duct
5-5
bonne réactivité. Les pièces sont arrivées comme prévu et bien emballées.
Pas de problèmes de conformité.
Bon vendeur, j'y retournerai.
Produit super mais panne incompréensible !
Ras 
4.7 / 5