3. INSPECTION/ADJUSTMENT Mongoose/KXR 90/50 Oil Filter Bolt/Measurement Hole TRANSMISSION OIL TRANSMISSION OIL MEASUREMENT Place the machine on a level place. Remove the oil filler bolt and check the oil level. It should be up to the brim of the hole. If the level is low, add oil to raise it to the proper level. Reinstall the oil filler bolt and tighten to specification. Torque: 1.02.0kgf-m Drain Plug TRANSMISSION OIL REPLACEMENT Place the machine on a level place. Place a container under the engine. Remove the oil filler bolt and drain plug to drain the oil. Reinstall the drain plug and tighten to specification. Torque: 1.02.0kgf-m Fill the engine with oil and install the oil filler bolt. Torque: 1.02.0kgf-m Oil Capacity: At disassembly: 0.12L At change: 0.11L Be sure no foreign material enters the crankcase. Start the engine and warm up for a few minutes. While warming up, check for oil leakage. If oil leakage is found, stop the engine immediately and check for the cause. 3-11