13. REAR WHEEL/SWING ARM/ HYDRAULIC BRAKE Mongoose/KXR 90/50 REAR SWING ARM REMOVAL Place the machine on a level place. Elevate the rear wheels by placing a suitable stand under the rear of frame. Support the machine securely so there is no danger of it falling over. Remove the rear wheels, rear hubs, rear axle and axle hub. (Refer to the "REAR WHEEL" section in chapter 13.) Remove the lower bolt attaching the rear shock absorber. Lower Bolt When removing the lower bolt, hold the swing arm so that it does not drop downwards when the bolt is removed. Remove the upper bolt and then remove the shock absorber. Upper Bolt Securing Nut INSPECTION Check the tightening torque of the pivot shaft (swing arm) securing nut. Torque: 6.08.0kgf-m 13-10