kxr 50 90 2 Manuel atelier : Page 97

          6. ENGINE REMOVAL                                                  Mongoose/KXR 90/50

                                                                              Bolts
 ENGINE REMOVAL
 (Mongoose/KXR 90)
 Drain engine oil and transmission oil.
 (Refer to chapter 3)
 Remove frame covers and exhaust pipe.
 (Refer chapter 2)
 Remove air cleaner and carburetor. (Refer
 to chapter 5)

 Remove the two bolts on the drive sprocket.                     Drive Sprocket
 Remove the drive sprocket and washer.

                                                A.C. Generator/Starter Motor Couplers
 Remove the spark plug cap.
 Disconnect the A.C. generator and starter
 motor couplers.




                                                                                 Spark Plug Cap


                                                       Bolt and Nut            Bolt and Nut
 Remove the front two mounting bolts and
 two nuts at the engine right/left side.
 Remove the four bolts and then remove the
 left and right engine brackets at the engine
 right/left side.




                                                       Bolts                     Bolts


                                                                 Inlet Hose
 Remove the rear two mounting bolts and
 two nuts.
 Disconnect the inlet hose from the frame.




                                                Bolts and Nuts



                                                                                              6-2