kxr 50 90 2 Manuel atelier : Page 76

          4. LUBRICATION SYSTEM                                                Mongoose/KXR 90/50

                                                                                 Oil Inlet Tube
 OIL PUMP (Mongoose/KXR 50)
 REMOVAL
 Do not allow foreign matters to enter the
   crankcase. Before removing the oil
   pump, clean the oil pump and crankcase
   surfaces.

 Disconnect the oil outlet tube from the oil
 pump.                                                     Oil Pump Control Cable
 Disconnect the oil pump control cable from     Oil Outlet Tube
 the pump body.
 Disconnect the oil inlet tube.

    Before disconnecting the oil line, clip
    the oil line to avoid oil flowing out and
    then plug the oil line after it is
    disconnected.



                                                                  Oil Pump Control Cable
                                                Bolts
 Remove the oil pump control cable plate
 bolts.
 Remove the oil pump from the crankcase.




                                                            Oil Pump          Oil Pump Control
                                                                              Cable Plate
 OIL PUMP INSPECTION                                                 O-ring
 Remove the oil pump and inspect the
 following items:
 · Weakened O-ring
 · Damage to crankcase mating surface
 · Damage to pump body
 · Control lever operation
 · Oil leaks through oil seals
 · Worn or damaged pump pinion

   Do not disassemble the oil pump which
   cannot be used after disassembly.
                                                        Gear                      Control Lever

4-11