kxr 50 90 2 Manuel atelier : Page 228

          15. IGNITION SYSTEM                                                  Mongoose/KXR 90/50

                                                                        CDI Unit
 CDI UNIT INSPECTION
 Remove seat. ( 2-3)
 Disconnect the CDI coupler and remove the
 CDI unit.
 Measure the resistance between the
 terminals using the electric tester.

· Due to the semiconductor in circuit, it is
      necessary to use a specified tester for
      accurate testing. Use of an improper
      tester in an improper range may give
      false readings.
    · Use a YF-3501 Electric Tester.
    · In this table, "Needle swings then
      returns" indicates that there is a charging
      current applied to a condenser. The needle
      will then remain at "" unless the
      condenser is discharged.




 Mongoose/KXR 90(OFF ROAD) Unit: M
    Probe
                                                      Black/Yellow                 Black
               Black     Black/ Blue/
                                             Green
 (-)Probe                Yellow Yellow

  Black                                       
 Black/
                                              
 Yellow
  Blue/
                                              
 Yellow

  Green        4.9~5.5   4.9~5.5   4.9~5.5

                                                     Blue/Yellow           Green
 Note: The readings in this table are taken
            with a YF-3501 Tester.




15-5