20. LIGHTS/METERS/SWITCHES K-XCT 125i
SERVICE INFORMATION
GENERAL
A halogen head light bulb becomes very hot while the head light is turned on, and remains for a
while after it is turned off. Be sure to let it cool down before servicing.
Note the following when replacing the halogen headlight bulb
-Wear clean gloves while replacing the bulb. Do not put finger prints on the headlight bulb, as
they may create hot spots on the bulb and cause it to fail.
-If you touch the bulb with your bare hands, clean it with a cloth moistened with alcohol to
prevent its early failure.
-Be sure to install the dust cover after replacing the bulb.
Check the battery condition before performing any inspection that requires proper battery
voltage.
A continuity test can be made with the light switches installed on the scooter.
Route the wires and cables properly after servicing each component.
20-1
Très bien 
super piéce impécable et des prix juste ....jacky 
4.7 / 5