grand dink 125 mmc Manuel atelier : Page 51

Microfiches
Image preview

Page 49

Image preview

Page 50

Image preview

Page 52

Image preview

Page 53

1 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170 175 180 185 190 195 200 205 210 215 220 225 230 235 240 245 249
          3. INSPECTION/ADJUSTMENT                                                    GRAND DINK 125/150




 Coolant capacity         : 140020cc
 Radiator capacity        : 100020cc
 Reserve tank capacity : 40020cc
 Start the engine and check if there is no
 bubbles in the coolant and the coolant level is
 stable. Reinstall the radiator cap.
 If there are bubbles in the coolant, bleed air
 from the system.
 Fill the reserve tank with the recommended                        Drain Bolt
 coolant up to the upper line.



 BRAKE SYSTEM
 BRAKE LEVER
 Measure the front and rear brake lever free
 plays.




                                                    Rear Brake Reservoir     Front Brake Reservoir


 BRAKE FLUID
 Turn the steering handlebar upright and check
 if the front/rear brake fluid level is at the
 upper limit. If the brake fluid is insufficient,
 fill to the upper limit.
 Specified Brake Fluid: DOT-4
 · The brake fluid level will decrease if
     the brake pads are worn.




 BRAKE DISK/BRAKE PAD
 Check the brake disk surface for scratches,
 unevenness or abnormal wear.
 Check if the brake disk runout is within the
 specified service limit.
 Check if the brake pad wear exceeds the wear
 indicator line.
 · Keep grease or oil off the brake disk to
     avoid brake failure.                           Brake Disk             Wear Indicator Line

                                                                                           3-10