grand dink 125 mmc Manuel atelier : Page 46

          3. INSPECTION/ADJUSTMENT                                      GRAND DINK 125/150


                                                            Screws



 AIR CLEANER
 Remove the seven air cleaner case cover
 screws and the cover.




                                                     Air Cleaner Case Cover

                                                Air Cleaner Element


 Remove the air cleaner element.
 Check the element and replace it if it is
 excessively dirty or damaged.
 CHANGE INTERVAL
 More frequent replacement is required when
 riding in unusually dusty or rainy areas.
 · The air cleaner element has a viscous
      type paper element. Do not clean it
      with compressed air.
    · Be sure to install the air cleaner
      element and cover securely.

 SPARK PLUG
 Remove the frame center cover.
 Remove the spark plug cap and spark plug.
 Check the spark plug for wear and fouling
 deposits.
 Clean any fouling deposits with a spark plug
 cleaner or a wire brush.

                                                      Spark Plug




 Specified Spark Plug: NGK: DPR7EA-9                                   Cracks
 Measure the spark plug gap.                                           Damage
 Spark Plug Gap: 0.9mm
                                                                        Deformation
 · When installing, first screw in the          Gap
      spark plug by hand and then tighten it
      with a spark plug wrench.
                                                Wear
                                                      
                                                Fouling
                                                Deposits
                                                                      0.9mm

        Torque: 7.89.8N-m
3-5