13-1. FUEL SYSTEM/CARBURETOR/
FUEL PUMP/ FUEL TANK GRAND DINK 125/150
SERVICE INFORMATION
GENERAL INSTRUCTIONS
· When working with gasoline, keep away from sparks and flames.
· Note the locations of O-rings when disassembling and replace them with new ones during
assembly.
· Before float chamber disassembly, drain the residual gasoline from the float chamber.
· Do not try to disassemble the auto bystarter.
· When assembling the vacuum chamber and air cut-off valve, be careful not to damage the
diaphragms.
· All cables, fuel lines and wires must be routed and secured at correct locations.
· When removing the fuel tank, keep sparks and flames away from the working area.
· When removing the fuel tank, the remaining fuel in the tank must be lower than of the fuel tank
capacity to avoid gasoline overflowing.
· Fuel tank capacity: 10.5 liters
SPECIFICATIONS
125cc 150cc
Venturi dia. (mm) VE26 VE26
Identification number VE060A VE061A
Float level (mm) 18.5 18.5
Pilot screw opening 21/2 2 1/21/2
Main jet 102# 102#
Slow jet 35# 35#
Idle speed 1700 1700
Fuel pump output 17L/Hr/7000rpm 17L/Hr/7000rpm
SPECIAL TOOLS
Float level gauge
Fuel unit remover
13-5
4.7 / 5